Amana AM30LP-P Use and Care Guide download pdf (Page 13)

1. Take the side burner package out from inside the grill head.

2. Tilt the grill head on its back and loosen the four (4) grill mounting bolts so that there is approxi-

mately 1/4” between the bolt head and grill bottom.

Note: The bolts are already attached to the grill head bottom.

3. Unpack the side burner valve and regulator assembly from the bottom of the grill. Then have

someone help you pick up the grill and set it squarely on top of the cart.

Note: Be careful not to damage the side burner, valve and regulator.

4. Make sure the four (4) bolts fall through the large opening on the “key hole” slots in the cart sides.

5. Slide the grill forward in the “key hole” slots until the back of the grill head matches the cart back.

Check on the inside of the cart to make sure that both sides of the grill are flush with the cart.

6. Install four (4) self-tapping screws into the top front and side cart flanges.

Note: Install the self-tapping screws from outside of cart so that the point of screw is in the

inside of the cart.

7. Tighten the four (4) grill head mounting bolts underneath the grill to secure the grill to the cart.

A. Grill head assembly

B. Grill head mounting bolts

C. Self-tapping screws

ASSEMBLY INSTRUCTIONS

Step 3: Assemble Grill Head

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Amana AM30LP-P Use and Care Guide Page 13