Amana AM30LP-P Use and Care Guide download pdf (Page 20)

ASSEMBLY INSTRUCTIONS

Step 8: Assemble the Side Valve & igniter module

1. Unscrew the igniter button cap and the plastic nut from the igniter module. Insert the neck of

the igniter module to the round hole on the shelf front face. Then use the plastic nut to

secure the igniter module in position. Install battery into battery compartment, negative (-)

end in first. Screw igniter push button cap on.

2. Using a Phillips screwdriver, remove the 2 screws from the side burner valve assembly.

3. Push the valve stem out through the opening in the front of the side burner shelf, lining up the

threaded holes in the side burner valve assembly with the openings on the side burner shelf.

4. Position the side burner bezel (C) into place, with the OFF position pointing up, making sure

to line up the holes.

5. Attach side burner bezel to side burner assembly face with screws removed in step 2.

6. Press knob onto valve assembly stem with OFF position pointing up.

A. Igniter module

B. Plastic nut

C. AA battery

D. Igniter push button cap

E. Side burner valve assembly

F. Large bezel

G. Phillips pan head screw

H. Control knob

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

Amana AM30LP-P Use and Care Guide Page 20