Amana PBWS01A User Manual download pdf (Page 2)

16 3/4"

426 mm

26"

661 mm

15 3/4"

401 mm

Figure 1

Wall Sleeve Dimensions

Inside Wall

Lintels

1" Min.

5" Min.

Outside Wall

Ceiling

24"

Min.

Figure 2

Minimum Unit Clearances

Finished Floor

Figure 3

Minimum Wall Opening Dimensions

Preinstallation Considerations

Before proceeding with the sleeve installation, ensure the

following guidelines for locating the wall opening and

sleeve are met:

• The wall opening must be the correct size. See Figure

1 for wall sleeve dimensions and Figure 3 for minimum

wall opening size.

• The wall sleeve must be installed with a 5” minimum

clearance to the floor and 1 1/2” to adjacent walls. See

Figure 2 for minimum projections of the sleeve into

and out of the room.

• If installed in a concrete or masonry wall, a lintel must

be provided in the wall opening for support. Do not

use the wall sleeve as a lintel. If the wall is less than

8” thick or of hollow construction, an alternate means

of support for the sleeve must be provided. See Figure

4 for a typical lintel construction.

Wood

Frame

Lintel

Figure 4

Framing with Lintel

• When installed in the opening, the wall sleeve must be

level from side to side and sloped one quarter bubble

front to back. DO NOT SLOPE THE WALL SLEEVE

TOWARD THE ROOM. See Figure 5.

1/4 Bubble Lower

Front to Back

Level

Rail

Flashing

Figure 5

Sleeve Installation

Waterproof Barrier

1 2 3 4

Comments to this Manuals

No comments

Amana PBWS01A User Manual Page 2

Comments to this Manuals

Related products and manuals for Unknown Amana PBWS01A