Amana Commercial Owner's Manual download pdf (Page 12)

Care and Cleaning

To avoid risk of burns or

electrical shock:

• disconnect electrical supply to

oven before changing light bulb.

• before replacing light bulb make

sure oven and bulb are cool.

• do not operate oven without

bulb and access cover in place.

To avoid risk of personal injury,

wear gloves to protect hands

from accidental bulb breakage.

To avoid risk of product damage,

do not operate oven without

splatter shield in place. Arcing

will damage oven cavity and

antenna when operated without

shield in place.

Cleaning Splatter Shield

Splatter shield keeps top of microwave oven cavity and antenna from

becoming soiled. Clean soil from shield with damp cloth or clean with mild

detergent and water. Remove splatter shield for easy cleaning.

1. Unplug oven before removing splatter shield to stop antenna from

rotating.

2. Place ngers on front of shield, push forward, and down.

• When removing and replacing splatter shield, be careful not to bend

antenna.

Removing Splatter Shield

3. Wash shield in hot, soapy water. Rinse and dry thoroughly.

• Do not wash splatter shield in dishwasher.

• Do not use abrasive cleaners.

4. Reinstall splatter shield by tting tabs into slots at top of oven cavity

back. Lift and press front of shield until shield snaps into place.

1. Disconnect electrical supply.

2. Remove screw from access cover

on top left wall of oven exterior.

3. While wearing protective

gloves, unscrew the light bulb

counterclockwise.

4. Replace light bulb with 230-volt,

40-watt appliance bulb.

• Donotovertightenbulborit

maybedifculttoremovelater.

5. Replace access cover before use.

6. Reconnect power supply.

Replacing Oven Light

1 2 ... 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Amana Commercial Owner's Manual Page 12

Comments to this Manuals

Related products and manuals for Microwaves Amana Commercial