Amana Top-Freezer Refrigerator User Manual download pdf (Page 7)

Procedure

1. Remove plastic cap from water valve inlet port.

A. Water valve inlet port B. Plastic cap

Cap removal

2. Place brass nut and brass sleeve on copper tubing

(Brass nut and sleeve are found in literature packet).

Insert copper tubing into water valve inlet port.

Connect brass nut on copper tubing to water valve

inlet port. Start connection by hand then use a

/2" (13

mm) open end wrench. Make sure copper tubing is

secure by pulling on copper tubing.

A. “P” clamp B. Copper Tubing

C. Brass sleeve D. Brass nut

E. Water valve inlet port

Connect ice maker water suppy line

3. Turn on water supply to refrigerator and check for

leaks. Correct any leaks at connection. Be careful not

to overtighten connection.

4. Create a service loop using extreme care to avoid

kinks. Secure copper tubing to refrigerator cabinet

with a “P” clamp.

5. Proceed to

Leveling Refrigerator

for final refrigerator

placement.

6. Review

Installation Checklist

in Owner’s Manual with

consumer.

Controls

This refrigerator operates at household temperatures of

55° to 110°F (13° to 43°C).

Fresh Food and Deepfreeze

Controls

Fresh Food and Deepfreeze

controls are located on

center divider between Fresh Food and Deepfreeze

sections.

When Deepfreeze

control is set to

OFF

, neither Fresh

Food nor Deepfreeze

sections will cool. Initially, set both

controls to

. Wait 24 hours for Fresh Food and

Deepfreeze

sections to reach desired temperatures.

After 24 hours, adjust controls, one number at a time, as

desired. 1 is warmest setting and 7 is coldest.

Setting Controls

Set controls precisely with a household thermometer that

includes temperatures between -5° to 50°F

(-21° to 10°C).

Put thermometer snugly between frozen packages in

Deepfreeze

section. Wait 5-8 hours. If Deepfreeze

temperature is not 0° to 2°F (-17° to -16°C), adjust

control, 1 number at a time. Check again after 5-8 hours.

Put thermometer in a glass of water in middle of Fresh

Food section. Wait 5-8 hours. If Fresh Food temperature

is not 38° to 40°F (3° to 4°C), adjust control, 1 number at

a time. Check again after 5-8 hours.

Exterior Moisture Control

Exterior Moisture Control is located on center divider

between Fresh Food and Deepfreeze

sections.

In humid conditions, refrigerators form condensation

around doors. Special heaters in refrigerator cabinet

minimize condensation.

Humidity depends on location of refrigerator. Set control to

if refrigerator is in a humid area or whenever moisture

is evident around doors. Set control to

OFF

if refrigerator

is in a less humid area. Setting can be adjusted as

conditions change.

High quality steel is used in this refrigerator. However,

constant exposure to moisture may cause refrigerator

cabinet to rust. Set control to

anytime condensation

forms on refrigerator cabinet.

1 2 3 4 5 6 7 8 9 10 11 12 ... 56 57

Comments to this Manuals

No comments

Amana Top-Freezer Refrigerator User Manual Page 7

Comments to this Manuals

Related products and manuals for Refrigerators Amana Top-Freezer Refrigerator