Amana ACE245E Owner's Manual download pdf (Page 11)

Fig.# 3

Control Panel

Once the function mode is decided you will have to set the fan speed.(See fig. #4)

Every time you press the SPEED button, fan speed will change between LOW,

HIGH,MED.

1) If you choose the COOL mode you can run the fan in one of the 3 speeds HIGH,

MED, LOW.

2) For cool days you may want to run the '_FAN'_function. The fan can be set to run at

3 speeds (HIGH fan, MED fan, LOW fan)as desired by you.

3) If you choose to use the Dehumid function. This will remove excess moisture

from the air on excessively humid days.

Tr: temperature inside the room.

Ts: the set temperature.

1 ) When Tr>Ts+3 °F, the compressor will run continuously the fan at the

selected speed.

2)When Ts-1 °F_Tr_Ts+3 °F the compressor will cycle for 10 minutes on

and 6 minutes off.

3)When Tr<Ts-1 °F, the compressor will shut off.

The dehumidification process takes place between the set temperature -1

and 3 °F above the set temperature.

4)Energy Saver : The unit runs the same as COOL setting in the ENERGY SAVER

mode. But the fan will be off 3 minutes after the compressor cycle off.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 24 25

No comments

Amana ACE245E Owner's Manual Page 11