Amana ACE245E Owner's Manual download pdf (Page 20)

WoB |nstoNotions: slide-out chassis only

Note: Remove the 2 shipping screws on the top of the air conditioner

that hdd the chassis to the outer shd[ casing. Once removed,

these do not have to be re-instdbd. To ensure that your air

conditioner is properly installed in the wall, it is recommended

that it be installed by a certified technician who is familiar with

through the wall installations.

1) Using wood, 1" or more in thickness, build a wooden frame to fit the

casing/cabinet dimensions of the unit which you have purchased.

2) Measure theoutside width and the height of the frame to determine the

cutoutdimensionsnecessaryfor theopening in thewall. The depth of the

frame wi[[ depend on the depth of thewall. The finished frame mustbe set

in the insidewall. Theframe has to be squaredand bvded. Rememberthe

frame hasto be nailed securelyto the wail studs. (See Fig. # 19)

Fig. # 19

3) Now to install, insertthe casing into thewall opening. (Removethe

chassisout first following steps1 - 6 in Slide-outchassissection).

Make sure that the cabinetis at least 1/2" inch insidethe room. Also the

side louversshould not be blocked. Thisis to have proper air circulation in

and around the compressor.(SeeFig, # 20)

1 2 ... 15 16 17 18 19 20 21 22 23 24 25

No comments

Amana ACE245E Owner's Manual Page 20