Amana ACO1860AS Owner's Manual download pdf (Page 10)

- 10 -

INSTALLATION

PARTS, TOOLS, MATERIALS

Clear tape

(for taping the templates to the wall)

Stud finder or thin nail.

Saber saw (for cutting vent

holes for roof or wall venting)

Keyhole saw (for the power cord hole)

Electric drill

3/8" and 3/4" wood drill bits

1/2" and 3/16"

drill bits

Phillips screwdriver (for the screws)

Pencil

Flat blade screwdriver (for the toggle bolts)

Measuring tape (metal preferred)

Small side cutters or tin snips Caulking gun

Plumb line

Duct Tape

YOU WILL NEED THE FOLLOWING TOOLS AND MATERIALS FOR THE INSTALLATION:

Carton or other heavy material for covering the counter top.

• If you have brick or masonry walls, you will need special hardware and tools.

• The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft

damper.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 46 47

No comments

Amana ACO1860AS Owner's Manual Page 10