Amana ACO1860AS Owner's Manual download pdf (Page 20)

STEP 6: ATTACH THE OVEN TO THE WALL

1. Carefully lift microwave oven and hang it on support tabs

(See Figure 26 at the bottom of the mounting plate.) Reaching

through upper cabinet, thread power supply cord through the

power supply cord hole in the bottom of the upper cabinet. See

Figure 30.

2. Rotate the microwave oven upward so the top of oven is against

the bottom of the upper cabinet or cabinet frame.

3. Drop the lock pin and washer assembly into hole N (left side

hole) and push the pin down as far as it will go.

See Figure 31.

4. Place washers over two 1/4"x3" bolts. Then insert a bolt down

through each hole in the upper cabinet bottom.

Tighten the bolts until the gap between the upper cabinet and

microwave oven is closed. See Figure 32.

5. Remove the lock pin and washer.

If wall-vented or room-vented installation is used, skip to

No. 6, 7.

To avoid risk of personal injury or property damage, you will need two people to install this microwave oven.

CAUTION

- 20 -

INSTALLATION

Figure 30

Figure 32

washer

Figure 31

lock pin

power cord

hole

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

No comments

Amana ACO1860AS Owner's Manual Page 20