Amana AMV2174VA User Manual download pdf (Page 1)

6" (15.2 cm) vent system = 73 ft (22.2 m) total

A. Two 90° elbows = 20 ft (6.1 m)

B. 1 wall cap = 40 ft (12.2 m)

C. 1 rectangular to round transition piece = 5 ft (1.5 m)

D. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)

A B

C D

6 ft (1.8 m)

2 ft

(0.6 m)

⁷⁄₈

" (76.0 cm)

³⁄₄

(40.0 cm)

¹⁄₄

(43.8

cm)

⁄₄

(41.3 cm)

PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS

VENTING REQUIREMENTS

AMV1160VA AMV2174VA

Electrical: A 120-volt, 60-Hz, AC-only, 15- or 20-amp fused electrical

supply with a fuse or circuit breaker. A time-delay fuse or time-delay circuit

breaker is recommended. It is recommended that a separate circuit serving

only this microwave oven be provided.

Microwave Hood Combination

Because Whirlpool Corporation policy includes a continuous commitment to improve

our products, we reserve the right to change materials and specifications without notice.

Dimensions are for planning purposes only. For complete details, see Installation

Instructions packed with product. Specifications subject to change without notice.

Ref. W10191951

09-15-08

CABINET OPENING DIMENSIONS

A 3¹⁄₄" x 10" (8.3 x 25.4 cm) rectangular or 6" (15.2 cm) round vent should be used.

The total length of the vent system including straight vent, elbow(s), transitions and wall

or roof caps must not exceed the equivalent of 140 ft (42.7 m) for either type of vent.

For best performance, use no more than three 90° elbows.

To calculate the length of the system you need, add the equivalent length for each vent

piece used in the system. See the following examples:

The grounded 3 prong outlet must be inside the upper cabinet.

*30" (76.2 cm) is typical for 66" (167.6 cm) installation height.

Exact dimensions may vary depending on type of range/cooktop

below.

A. 2" x 4" wall stud

B. Grounded 3-prong outlet

66" (167.6 cm) min.

12" (30.5 cm) min.

14" (35.6 cm) max.

A B

30" (76.2 cm) typical*

30"

(76.2 cm)

min.

A. Rectangular to round transition piece: 3

¹⁄₄

" x 10" to 6" = 5 ft

(8.3 x 25.4 cm to 15.2 cm = 1.5 m)

B. Roof cap: 3

¹⁄₄

" x 10" = 24 ft (8.3 x 25.4 cm = 7.3 m)

C. 90° elbow: 3

" x 10" = 25 ft (8.3 x 25.4 cm = 7.6 m)

D. 90° elbow: 6" = 10 ft (15.2 cm = 3 m)

E. Wall cap: 3

¹⁄₄

" x 10" = 40 ft (8.3 x 25.4 cm = 12.2 m)

F. 45° elbow: 6" = 5 ft (15.2 cm = 1.5 m)

G. 90° flat elbow: 3

¹⁄₄

" x 10" = 10 ft (8.3 x 25.4 cm = 3 m)

A B C

D E F G

3¹⁄₄" x 10" (8.3 x 25.4 cm) vent system = 73 ft (22.2 m) total

A. One 3

¹⁄₄

" x 10" (8.3 x 25.4 cm) 90° elbow = 25 ft (7.6 m)

B. 1 wall cap = 40 ft (12.2 m)

C. 2 ft (0.6 m) + 6 ft (1.8 m) straight = 8 ft (2.4 m)

A B

6 ft (1.8 m)

2 ft

(0.6 m)

Rectangular to Round Transition for Roof Venting

NOTE: The minimum 3" (7.6 cm) clearance must exist between

the top of the microwave oven and the rectangular to round

transition piece so that the damper can open freely and fully.

3" (7.6 cm)

A. Roof cap

B. 6" (15.2 cm) min. diameter round vent

C. Elbow (for wall venting only)

D. Wall cap

E. 3

¹⁄₄

" x 10" to 6" (8.3 x 25.4 cm to 15.2 cm)

rectangular to round transition piece

F. Vent extension piece, at least 3" (7.6 cm) high

Microwave Hood Combination 1

Summary of Contents

Page 1 - Microwave Hood Combination

6" (15.2 cm) vent system = 73 ft (22.2 m) totalA. Two 90° elbows = 20 ft (6.1 m)B. 1 wall cap = 40 ft (12.2 m)C. 1 rectangular to round transitio

Related models: AMV1160VA

Comments to this Manuals

No comments

Amana AMV2174VA User Manual Page 1

Browse online or download User Manual for Microwaves Amana AMV2174VA. Amana AMV2174VA User Manual

Summary of Contents

Related models: AMV1160VA

Comments to this Manuals

Amana AMV2174VA User Manual Page 1

Browse online or download User Manual for Microwaves Amana AMV2174VA. Amana AMV2174VA User Manual

Summary of Contents

Related models: AMV1160VA

Comments to this Manuals

Related products and manuals for Microwaves Amana AMV2174VA