Amana ACS3350 User Manual download pdf (Page 9)

Using the Range

Setting Surface Burner Controls

Burner should ignite within 4 seconds. If burner does not

ignite within 4 seconds, turn control knob to OFF position

and follow directions in Placing Burner Caps section.

See Delayed Ignition section in Important Safety

Information for safety warnings and procedures.

1. Push in and turn knob to LITE.

 Burner should ignite within 4 seconds.

2. After gas ignites, turn control to desired setting.

 Knobs do not have distinct clicks.

 Use HI to bring food to boiling temperatures. When food is boiling

temperature setting should be reduced.

 After lighting burner do not operate for long periods of time without

cookware on grate. The finish on the grate can chip without cookware

to absorb the heat.

 Flame size should match the size of the pan. Do not allow flame

to extend up the sides of the pan. This can cause clothing to ignite,

make the handle hot, or cause burns.

3. When finished cooking, turn control to OFF position.

During a Power Outage

Although the system that lights the

burners is electric, surface burners can

be ignited during a power outage. Never

attempt to light bake or broil burners

(oven burners) during a power

failure.

1. Hold match at base of desired

surface burner.

2. Push in burner control knob and

turn to LITE position.

3. After gas ignites, remove match

from burner and turn burner control

knob to desired setting.

Adjusting Burner Flame Size

 While turning the burner control knob, watch the burner flame.

 Flame size should match the size of the pan.

 Flames that extend up the sides of the pan can ignite clothing, make the

handle hot, or cause burns.

If These Controls

Are Different From

Yours

The control descriptions are intended to

show the variety of features that are

available in the product line. If your

range does not have all the features that

are shown, it is not a mistake. The

information provided applies to several

of the available models.

SURFACE BURNER

CONTROL SETTINGS

WHEN TO USE SETTING

Use to prepare food at less than boiling

temperatures or to simmer.

MED

Use to maintain boiling of larger amounts of food,

low temperature frying and to maintain correct

pressure in a pressure cooker.

Use to bring food to boiling temperatures. When

food is boiling temperature setting should be

reduced to LO through MED.

WARNING

To avoid risk of serious personal

injury, property damage, or fire,

do not leave surface burners

unattended while in operation.

Grease and spillovers may ignite

causing a fire.

1 2 3 4 5 6 7 8 9 10 ... 28

Comments to this Manuals

No comments

Amana ACS3350 User Manual Page 9

Comments to this Manuals

Related products and manuals for Radio Amana ACS3350