Amana W10180837A User Manual download pdf (Page 7)

ELECTRONIC OVEN CONTROLS

Display

When power is first supplied to the appliance, a flashing time will

appear on the display. Press CANCEL/OFF to clear the display.

If a flashing time appears at any other time, a power failure has

occurred. Press CANCEL/OFF and reset the clock if needed.

When the oven is not in use, the display shows the time of day.

When performing a timed cook function, the display will show

either hours and minutes, or minutes and seconds.

Start

The Start pad begins any oven function, except kitchen timer. If

the Start pad is not pressed within 5 seconds after pressing a

function pad, the “START?” or “PUSH?” indicator light will

appear on the display (on some models).

If the Start pad is not pressed within 1 minute after pressing a

function pad, the oven display will return to the time of day mode

and the programmed function will be canceled.

Cancel/Off

The Cancel/Off pad stops any function except the Clock, Timer,

and Control Lock.

Clock

To Set:

Before setting, make sure the oven and Timer are off.

1. Press CLOCK.

2. Press the TEMP/HOUR “up” or “down” arrow pads to set the

time of day.

3. Press CLOCK or START.

On some models, clock display can be turned off or on by

pushing and holding CLOCK.

Range Lights

Oven Light

While the oven door is closed, press OVEN LIGHT to turn the

light on and off. The oven light will come on when the oven door

is opened.

Tones

Tones are audible signals, indicating the following:

Basic Functions

One tone

■ Valid pad press

■ Oven is preheating (long tone)

■ Function has been entered

■ Reminder (on some models), repeating each minute after the

end-of-cycle tones

Three tones

■ Invalid pad press

Four tones

■ End of cycle

Reminder Tones: The audible tones at the end of the Timer may

be set to beep once or continue to beep. Press and hold TIMER

for 5 seconds to enter Options mode. “Opt” will appear on the

display. Use TEMP/HOUR to cycle through the options until you

reach “b” or “b1” (depending on your model). Cycle on and off

using TIMER. Press CANCEL to exit the mode.

Fahrenheit and Celsius

The temperature is preset at Fahrenheit, but can be changed to

Celsius.

To change: Press and hold BROIL for 5 seconds. A tone will

sound and “°C” or “°F” will appear on the display. Repeat to

change back to Fahrenheit.

To exit mode, press CANCEL/OFF.

A. Oven light

B. Clock

C. Oven display

D. Start/control lock

E. Cancel/off

F. Te m p e r a t ur e / t i m e

G. Broil

H. Bake

I. Timer

1 2 3 4 5 6 7 8 ... 16

Comments to this Manuals

No comments

Amana W10180837A User Manual Page 7

Comments to this Manuals

Related products and manuals for Radio Amana W10180837A