Amana NTW4516FW Use and Care Guide download pdf (Page 9)

7. Select WASH TEMPERATURE

Select the wash temperature by turning the Wash Temperature

knob to the desired setting. All rinses are tap cold.

NOTE: Always read and follow fabric care label instructions

to avoid damage to your items.

Wash Temp Suggested Fabrics

Hot

Some cold water is added to save

energy. This may be cooler than

your hot water heater setting.

Whites and pastels

Durable items

Heavy soils

Warm

Some cold water may be added,

so this will be cooler than what

your previous washer provided.

Bright colors

Moderate to light soils

Cool

Warm water may be added to

assist in soil removal and to

help dissolve detergents. Cool

is slightly warmer than cold.

Colors that bleed or fade

Light soils

Cold

This is the temperature from your

faucet. If your tap cold water is

very cold, warm water may be

added to assist in soil removal

and help dissolve detergent.

Dark colors that bleed or fade

Light soils

Tap Cold

This is the temperature from your

faucet.

Dark colors that bleed or fade

Light soils

8. Press START/STOP/PAUSE/

UNLOCK LID to begin wash cycle

Press START/STOP/PAUSE/UNLOCK LID to start the wash

cycle. When the cycle has nished, the Cycle Complete

indicator will light. Promptly remove items after cycle has

completed to avoid odor, reduce wrinkling, and rusting of

metal hooks, zippers, and snaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments:

Press START/STOP/PAUSE/UNLOCK LID; the lid will unlock

once the washer movement has stopped. This may take

several minutes if the load was spinning at high speed. Then

close lid and press START/STOP/PAUSE/UNLOCK LID again

to restart the cycle.

NOTE: Washer will not ll with the lid open.

IMPORTANT: If lid is left open for more than 10 minutes,

the water will pump out automatically.

Manual soak

If you would like to manually soak your garments at any time

during the wash portion of the cycle, press START/STOP/

PAUSE/UNLOCK LID and leave the lid closed. Once your

desired soak time has elapsed, press START/STOP/PAUSE/

UNLOCK LID again to continue the cycle. As long as the

lid remains closed, your soak time can be longer than 10

minutes. However, if the lid is opened during the soak and

remains open for more than 10 minutes, the water will pump

out automatically.

9. Manually add fabric softener

During the nal rinse, wait until the washer has completed

lling, press START/STOP/PAUSE/UNLOCK LID to pause

the washer. Lift the lid and add the measured recommended

amount of liquid fabric softener. Do not use more than the

recommended amount. Close the lid and press START/

STOP/PAUSE/UNLOCK LID again to start the washer.

IMPORTANT: Always select Extra Rinse when manually

adding fabric softener. The Extra Rinse option uses

additional water and agitation for proper fabric softener

distribution.

Appearance may vary.

1 2 3 4 5 6 7 8 9 10 ... 36

Comments to this Manuals

No comments

Amana NTW4516FW Use and Care Guide Page 9

Comments to this Manuals