Amana AMV8 User Manual Page 12

  • Download
  • Add to my manuals
  • Print
  • Page
    / 16
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 11
P
roduct
S
PecificationS
12 www.amana-hac.com SS-AMV8
Heating SPeedS
ADV80703BXB
(rise rAnge: 20° - 50°F)
ADV80905CXB
(rise rAnge: 20° - 50°F)
H
eAting
speeD tAp
ADjust tAp
low-stAge
CFM¹
HigH-stAge
CFM¹
rise
˚F
HeAting
speeD tAp
ADjust tAp
low-stAge
CFM¹
HigH-stAge
CFM¹
rise
˚F
A
Minus (-) 720 958 ---
A
Minus (-)
945 1,257
---
Normal 800 1,064 49 Normal
1,050 1,397
48
Plus(+) 880 1,170 44 Plus(+)
1,155 1,536
43
B
Minus (-) 810 1,077 48
B
Minus (-)
1,035 1,377
48
Normal 900 1,197 43 Normal
1,150 1,530
43
Plus(+) 990 1,317 39 Plus(+)
1,265 1,682
40
C
Minus (-) 900 1,197 43
C
Minus (-)
1,125 1,496
44
Normal 1,000 1,330 39 Normal
1,250 1,663
40
Plus(+) 1,100 1,463 35 Plus(+)
1,375 1,829
36
D
Minus (-) 990 1,317 39
D
Minus (-)
1,215 1,616
41
Normal 1,100 1,463 35 Normal
1,350 1,796
37
Plus(+) 1,210 1,609 32 Plus(+)
1,485 1,975
34
¹ @ .1” to .5” w.c. ESP
* Motor CFM maximum
Motor CFM minimum
ADV81155CXB
(rise rAnge: 25° - 55°F)
H
eAting
speeD tAp
ADjust tAp
low-stAge
CFM¹
HigH-stAge
CFM¹
rise
˚F
A
Minus (-) 1,215 1,616 52
Normal 1,350 1,796 47
Plus(+) 1,485 1,975 43
B
Minus (-) 1,260 1,676 51
Normal 1,400 1,862 46
Plus(+) 1,540 2000* 41
C
Minus (-) 1,305 1,736 49
Normal 1,450 1,929 44
Plus(+) 1,595 2000* 40
D
Minus (-) 1,418 1,885 45
Normal 1,575 2000* 40
Plus(+) 1,733 2000* 37
¹ @ .1” to .5” w.c. ESP
* Motor CFM maximum
Motor CFM minimum
notes
These charts are for furnaces installed at 0’- 4,500’. At higher
altitudes, a properly de-rated unit will have the same tempera-
ture rise at a particular CFM, while the ESP at that CFM will be
lower.
The installation must be adjusted to obtain a temperature rise
within the range listed on the furnace nameplate.
Do not operate above .5” w.c. ESP in heating mode.
Propane gas installations will have a high-stage rise approxi-
mately 4° lower than shown in the tables.
adV8 Performance data (cont.)
Page view 11
1 2 ... 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments