Amana Heat Pumps Operations Instructions download pdf (Page 15)

Operating Controls

Operating your air conditioner properly helps you to obtain the

best possible results.

This section explains proper air conditioner operation.

IMPORTANT:

• If you turn off the air conditioner, wait at least 3 minutes

before turning it back on. This prevents the air condi-

tioner from blowing a fuse or tripping a circuit breaker.

• Do not try to operate your air conditioner in the cooling

mode when outside temperature is below 61°F (16°C).

Do not try to operate your air conditioner in the heating

mode when outside temperature is over 86°F (30°C).

NOTES:

1. NOTE: Factory default setting is for °F. To convert to

°C, press the INCREASE



 / DECREASE



 buttons

simultaneously for approximately 5 seconds. To return

to °F, repeat the procedure.

2. In the event of a power failure, your air conditioner will

operate at the previous settings when the power is

restored.

Lights next to the touch pads on the air conditioner control

panel indicate the selected settings.

Controls

n Power Pad (Button)

Turns air conditioner on and off. When turned on, the

display will show the room temperature.

o Display

Shows the Set temperature when in HEAT, COOL or

ENERGY SAVER mode; shows the time remaining on

the Delay Timer; shows the room temperature when in

Fan Only mode. The SET light will turn on while setting.

p Temp Increase  / Decrease  Pads

Use to set temperature when in HEAT (on some mod-

els), COOL or ENERGY SAVER mode. The SET light

will turn on while setting.

q Delay Timer Increase  (+) / Decrease (-) Pads

Each touch of the INCREASE



 / DECREASE



 pads

on the unit or the INCREASE (+) / DECREASE (-) pads

on the remote control will set the delay time when using

the TIMER 0.5-24 hr.

The SET light will turn on while setting.

r Fan Speed Pads

Use to set the fan speed to LOW, MED, HIGH or AUTO,

on the unit.

NOTE: On the remote control, use the fan speed IN-

CREASE (+) / DECREASE (-) pads to set the fan speeds

to LOW, MED or HIGH. Use the AUTO pad to turn Auto

fan on.

s Mode Pad

Use to set the air conditioner to COOL, ENERGY SAVER,

FAN ONLY or HEAT (on some models) mode.

t Timer Pads

TIMER ON - When the air conditioner is off, it can be set

to automatically come on in 0.5 (1/2 hr.) to 24 hours at

its previous mode and fan settings.

TIMER OFF - When the air conditioner is on, it can be

set to automatically turn off in 0.5 (1/2 hr.) to 24 hours.

control panel indicate the selected settings.

Set

TIMER

SWING

FAN

SPEED

MED

HIGH

LOW

AUTO

POWER

COOL

FAN ONLY

HEAT

MODE

0.5-24 HR

ENERGY SAVER

TEMP/TIMER

Light indicates the

delay timer is set.

Light indicates the unit

is in the temperature or

delay time Set mode.

The display always shows the room

temperature except when setting the

Set temperature or the Delay timer.

Air Conditioner Controls

Light indicates

SWING is on.

Light indicates

SWING is on.

The display always shows the room

temperature except when setting the

Set temperature or the Delay timer.

Light indicates the unit is in the temperature or

delay time Set mode.

Delay timer

Decrease



Mode select







Fan speed

Decrease







Temperature

set Increase

and Decrease





The display shows the Set temperature

when in HEAT, COOL or ENERGY SAVER

mode. It also shows the time remaining on

the Delay timer and the room temperature

when in Fan Only mode.

TIMER 0.5-24 hr

TIMER

1 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Amana Heat Pumps Operations Instructions Page 15

Comments to this Manuals

Related products and manuals for Split-system air conditioners Amana Heat Pumps