13
User Options
1. Open oven door. Display shows “door”.
• If door is closed or
RESET
pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press and hold pad
1
for approximately 5 seconds.
• After 5 seconds, signal sounds. Display shows
“Pb” or “Pd” indicating “b” or “d” menu.
3. Press
POWER LEVEL
pad.
• Displays shows “OP:1(0,1-3)”.
• “OP” represents optional program mode, first
number represents option number and second
number represents functions currently selected for
option.
4. Press
START
pad to advance to next option.See
table for options.
5. Press number pad (0,1-3) to change option.
6. Press
START
pad to save changes.
• Repeat steps 4-6 to change additional options.
7. Press
RESET
pad or close oven door to exit
programming mode.
Numbered
Pads
Display Options
( ) = Factory Setting
1OP:10
OP:11
Prevents addin
heatin
time while oven is heatin
.
(Allows adding heating time while oven is heating.)
2OP:20
OP:21
Sounds 3 second si
nal at end of heatin
c
cle.
Sounds 4 short signals at end of heating cycle.)
3OP:30
OP:31
(Allows 60 minutes of heating time.)
Allows 10 minutes of heatin
time.
4OP:40
OP:41
Prevents si
nal when pad is pressed.
(Allows signal when pad is pressed.)
5OP:50
OP:51
(Allows oven to resume heating time countdown after door is opened during cycle.)
Cancels heatin
time count down after door is opened durin
c
cle.
6OP:60
OP:61
(Allows use of power levels.)
Prevents use of power levels.
7OP:70
OP:71
OP:72
OP:73
Eliminates end of heatin
c
cle si
nal.
Sets end of heatin
c
cle si
nal volume to low.
Sets end of heatin
c
cle si
nal volume to medium.
(Sets end of heating cycle signal volume to high.)
9OP:90
OP:91
(Allows use of variable time entry and preprogrammed pads.)
Allows use of prepro
rammed pads onl
.
0OP:00
OP:01
(Allows lockout to be programmed.)
Prevents lockout from bein
pro
rammed.
Comments to this Manuals