8
Quick Reference Instructions
Read “Important Safety Information” before using “Quick
Reference Instructions”. If there are unanswered
questions, see to detailed sections of this manual.
Operating Preprogrammed Pads
1. Open oven door, place food in oven, and close oven
door.
2. Press
MENU b/d
pad to select preprogrammed
menu.
3. Press desired number pad.
4. Oven stops heating and oven signal sounds when
heating timing elapses.
Reviewing Preprogrammed Pads
1. Open oven door.
2. Press and hold
TIME ENTRY
pad for approximately
5 seconds.
3. Press
MENU b/d
pad to select preprogrammed
menu if necessary.
4. Press desired number pad.
5. Press
TIME ENTRY
pad to review heating stages
for pad.
6. Press
START
pad after reviewing preprogrammed
pad.
7. Press
RESET
pad or close oven door to exit
programming mode.
Manual Time Entry
1. Open oven door, place food in oven, and close oven
door.
2. Press
TIME ENTRY
pad.
3. Press number pads to enter desired cooking time.
4. Press
POWER LEVEL
pad if power level other than
100 percent is required.
5. Press number pad to enter desired power level.
6. Press
START
pad.
7. Oven stops heating and oven signal sounds when
heating timing elapses.
Preprogrammed Number Pads
1. Open oven door.
2. Press and hold pad
1
for approximately 5 seconds.
3. Press
MENU b/d
pad to select preprogrammed
menu if necessary.
4. Press desired number pad.
5. Press number pads to enter desired cooking time.
6. Press
POWER LEVEL
pad if power level other than
100 percent is required.
7. Press number pad to enter desired power level.
8. Press
START
pad to save new heating time and
power level in oven memory.
9. Press
RESET
pad or close oven door to exit
programming mode.
Multiple Heating Stages
1. Open oven door.
2. Press pad
1
for approximately 5 seconds.
3. Press
MENU b/d
pad to select preprogrammed
menu if necessary.
4. Press desired number pad.
5. Press number pads to enter desired cooking time.
6. Press
POWER LEVEL
pad if power level other than
100 percent is required.
7. Press number pad to enter desired power level.
8. Press
TIME ENTRY
pad.
9. Press
START
pad to save new heating time and
power level in oven memory.
10. Press
RESET
pad or close oven door to exit
programming mode.
Deactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad
1
for approximately 5 seconds.
3. Press desired number pad.
4. Press
MENU b/d
pad.
5. Press
START
pad to save in oven memory.
6. Press
RESET
pad or close oven door to exit
programming mode.
Reactivating Preprogrammed Pad
1. Open oven door.
2. Press and hold pad
1
for approximately 5 seconds.
3. Press desired number pad.
4. Press
MENU b/d
pad.
5. Program pad according to “Preprogrammed Number
Pads” section step 5-8.
6. Press
START
pad to save in oven memory.
7. Press
RESET
pad or close oven door to exit
programming mode.
Deactivating Control Panel
1. Open oven door, and close oven door.
2. Press
TIME ENTRY
pad.
3. Press
1,3,5,
and
7
pad in sequence.
4. Press
TIME ENTRY
pad.
User Options
1. Open oven door. Display shows “door”.
2. Press and hold pad
1
for approximately 5 seconds.
3. Press
POWER LEVEL
pad.
4. Press
START
pad to advance to next option.See
table for options.
5. Press number pad (0,1-3) to change option.
6. Press
START
pad to save changes.
7. Press
RESET
pad or close oven door to exit
programming mode.
Comments to this Manuals