8
F. Mounting Microwave Oven
Caution
To avoid personal injury and oven
door damage, do not lift oven using
door handle. Two people should lift
oven when installing.
1. Locate grease filters packed separately and set aside.
Thread power cord through hole, or slot, in bottom of
top cabinet. Keep cord tight throughout step 2.
2. Install microwave by sliding onto arms of mounting
plate. Push microwave oven flush to wall. Verify
cord is tight.
3. Attach microwave oven to top cabinet. Use filler
block if cabinet front hangs below cabinet bottom
shelf.
4. Insert 4 screws with washers through top cabinet
holes and tighten to top of microwave oven. (While
tightening screws, lift front side of microwave oven
and push toward wall.)
5. Install grease filters.
6. For top exhaust, open top cabinet and attach exhaust
adaptor to microwave oven through cabinet bottom.
For front-to-back or side-to-side adjustment, slide
exhaust adaptor as needed.
Twist exhaust adaptor to fit under flaps of blower
plate. Verify damper moves freely. Square corner on
hinge ends.
7. Pull house duct down to connect to exhaust adaptor.
G. Installation Checklist
1. Verify microwave oven has been installed according
to instructions.
2. Remove all packing material from microwave oven.
3. Replace house fuse or turn on breaker.
4. Plug power cord into outlet.
5. Read use and care manual.
Comments to this Manuals