Amana ART6522 Owner's Manual download pdf (Page 11)

code Warning

F1 Shorted pad button

F2 Oven cavity over temperature

F3 Open circuit in oven

temperature sensor circuit

F4 Shorted circuit in oven

temperature sensor circuit

F5 Failed control.

F7 Failure of door lock switch

sensing with door locked.

F9 Failure of door lock switch

sensing with door unlocked

DOOR Door Latch Failure

Custom Features

12-hour automatic cancel

This safety feature prevents oven from continuing to operate if it has been

left on for over 12 hours. If a cooking function continues longer than 12 hours

without any options on oven control being touched, this feature turns oven

off. Any time an option is touched, 12-hour automatic cancel is reset.

Child lockout

This safety feature is used to prevent children from accidentally programming

oven by disabling electronic oven control. Press and hold BAKE and CLOCK

for 5 seconds. “OFF” displays where the temperature normally appears. To

reactivate control, press and hold BAKE and CLOCK pads for 5 seconds on

the upper oven control. Child lockout must be reset after a power failure.

Oven temperature control adjustment

Your new range is calibrated at the factory for temperature. Due to individual

variances and preferences, it may be necessary to adjust individual ovens

once they have been installed.

When first using oven, follow recipe times and temperatures. Before

adjusting oven baking temperature, test a recipe by using a temperature set

higher or lower than the recommended temperature. The baking results

should help you to decide how much adjustment is needed. Remember that

a convection oven will cook food more quickly than a standard (conventional)

oven.

An accurate digital thermometer is necessary to calibrate the oven. Store

purchased oven thermometers do not measure oven temperature accurately.

NOTE: Remove aluminum foil from oven—it will alter oven performance.

Check for blocked heat vents. If it still appears the oven is not performing as

expected, a calibration may be done.

1. Push BAKE pad.

2. Push up arrow pad until an oven temperature more than 500°F displays.

3. Immediately push and hold BAKE pad (approximately 5 seconds)

4. A double digit number will display ranging from -35 to 35.

5. Immediately, press either

•

to increase oven temperature by 5°F. Maximum change is 35°F.

•

to decrease oven temperature by 5°F. Maximum change is 35°F.

• When temperature is adjusted to a cooler setting, a minus sign (-) will

display with the offset temperature.

4. When desired temperature change is displayed, push OVEN CANCEL

button. Temperature adjustment will be retained through a power failure.

Service codes and tones

Electronic oven control is equipped with a self-diagnostic system.

Self-diagnostic system alerts you if there is an error or problem with the unit.

If the electronic range control sounds a series of beeps and display shows

an F-code, record the F-code shown and turn control to OFF. Some F-codes

can be cleared by disconnecting power to the range. If the code continues to

reoccur disconnect electrical supply to range and contact an authorized

servicer.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Comments to this Manuals

No comments

Amana ART6522 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Ovens Amana ART6522