Amana ART6522 Owner's Manual download pdf (Page 6)

OFF

MED

Cooking on the Smoothtop

Setting Surface Element Controls

Push in and turn the surface element control

knobs in either direction to turn on the

surface elements. Surface elements are

located under the ceramic cooking surface

and radiate heat through the cooktop. It is

normal for the element to cycle on and off

during heating. The controls have infinite

settings between

LO and HI for fine temperature control.

1. Push in and turn surface element

control to desired setting.

2. When finished cooking, turn control to

OFF position.

Dual Surface Elements

Dual surface elements have an inner and outer

element that can be set according to your pan size.

The outer edge of your pan should always cover

the element graphic, with a maximum overhang of

1 inch. To use inner and outer element

simultaneously, depress switch to LARGE position.

To use inner element only, turn switch to SMALL

position.

SURFACE ELEMENT

CONTROL SETTINGS

WHEN TO USE SETTING

Use to prepare food at less than boiling

temperatures or to simmer.

MED

Use to maintain boiling of larger amounts of food,

low temperature frying.

Use to bring food to boiling temperatures. When

food is boiling temperature setting should be

reduced to LO through MED.

Cooking Safely with

Surface Elements

WARNING

To avoid risk of serious personal

injury, property damage, or fire,

do not leave surface elements

unattended while in operation.

Grease and spillovers can ignite

causing a fire.

WARNING

To avoid risk of electrical shock

or serious personal injury,

• never cook on a broken

smoothtop cooking surface.

Spillovers can penetrate

broken surface and cause

electric shock.

• never clean broken cooktop.

Cleaners can penetrate broken

surface and cause electric

shock.

If smoothtop cooking surface

breaks, discontinue use and

notify an authorized servicer

immediately.

LARGE

SMALL

WARNING

To avoid serious personal injury,

do not use a damp or wet cloth to

clean up spills on a hot or warm

cooktop. Moist or damp cloths on

hot surfaces may result in burns

from steam.

After you cook...

...remember to establish a cleaning routine for your smoothtop. Cooktops can be

sensitive to certain cooking spillovers. Unlike conventional ranges, smoothtops

should not be cleaned with a wet dishcloth when wiping down other counters. Daily

care is quick, easy and can prevent damage. To purchase Amana recommended

cleaning products, contact our Consumer Affairs department

at (800) 843-0304.

Indicator Lights

Surface elements are indicated by an indicator light that glows when the element is

turned on. The location and number of indicator lights vary with each model. After

a surface control is turned off, the surface indicator light will continue to glow until

each surface elements have cooled to approximately 145°F. The length of time the

light remains on will vary. If there is more than one surface element light, do not

expect the lights to shut off at the same time.

1 2 3 4 5 6 7 8 9 10 11 ... 27 28

Comments to this Manuals

No comments

Amana ART6522 Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Ovens Amana ART6522