Amana Commercial Service Manual download pdf (Page 50)

A–15 RS2240002 Rev. 0

Operation

Interrupting Operation

Open oven door or press

STOP/RESET

pad to interrupt operation. Display

continues to show countdown time. Close

door and press

START

pad to resume oven

operation.

Canceling Mistakes

If oven is not cooking, press

STOP/RESET

pad to

clear display. If oven is cooking, press

STOP/

RESET

pad once to stop oven, then again to clear

display. If oven door is open and time shows in display,

close oven door and press

STOP/RESET

pad to clear

display.

Operating Preprogrammed Pads

From the factory, this oven can of store up to 10

preprogrammed cooking sequences in memory.

To heat using a preprogrammed sequence, press

a numbered pad. Oven starts to heat

automatically. Example: Heat using the third cooking

sequence.

1. Open oven door, place food in oven, and close oven

door.

• Display shows “READY”.

• If pad is not pressed in 60 seconds, open and close

oven door again.

2. Press 3 pad.

• Oven operates and time counts down.

• Display shows cooking time, “POWER”, ”COOK

LEVEL”. Display shows “POWER” only when

microwave energy is present.

• If power level other than 100 percent power was

programmed, display shows “COOK LEVEL” and

power level.

• If additional cooking time is required, press

preprogrammed pads before or after cooking cycle

ends.

3. Oven stops cooking and oven signal sounds when

cooking timing elapses.

Preprogrammed Times and Cook Level

All preprogrammed pads arrive set at full power.

Pads Times Pads Times

1 10 sec. 6 1:30 min.

2 20 sec. 7 2 min.

3 30 sec. 8 3 min.

4 45 sec. 9 4 min.

5 1 min. 0 5 min.

Double Pad Programs

The oven control can be changed to store

up to 100 cooking programs. See the

“User’s Options” section of this manual to

change oven control.

To start a double pad cooking program, press 2 memory

pads. For example, press pad 0 and pad 3 to start a

cooking program.

Using X2 Pad

X2 pad increases the cooking time when cooking more

than one item at a time is necessary. The amount

of added time when the X2 pad is pressed is a

percent of the original preprogrammed cooking

time. The percent can be set from 10% to 100% with the

default at 80%. The percent of the time added can be

changed for individual cooking programs.

Press X2 pad before pressing memory pad. For example,

press X2 pad and then memory pad 3. Pad 3 normally

cooks for 30 seconds. When the X2 pad is pressed

before memory pad 3, 54 seconds displays because it

added 24 seconds, (80% of 30 sec. =24 sec.).

Manual Time Entry

Manual Time Entry feature allows the operator to enter

time and power levels, and heat without changing the

preprogrammed pads. Example: Heat for 30 seconds at

80% power.

1. Open oven door, place food in oven, and

close door.

• Display shows “READY”. Fan and

light operate.

• If pad is not pressed in 60 seconds,

open and close oven door again.

2. Press TIME ENTRY pad.

• Display shows “0000” and “READY”.

3. Press 3 and 0 pad to enter cooking time.

4. Press POWER LEVEL pad to change power

level.

• Display shows “COOK LEVEL” and current

power level if other than 100 percent power.

5. Press 8 pad to enter desired power level.

6. Press START pad.

• Oven operates and time counts down.

• Display shows cooking time, “POWER”,

“COOK LEVEL”.

• Display shows “POWER” only when microwave

energy is present.

• If power level other than 100 percent power was

programmed, display shows “COOK LEVEL” and

power level. Display counts down cooking time.

7. Oven stops cooking and oven signal sounds when

cooking timing elapses.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 59 60

Comments to this Manuals

No comments

Amana Commercial Service Manual Page 50

Comments to this Manuals

Related products and manuals for Microwaves Amana Commercial