Amana Commercial Service Manual download pdf (Page 52)

A–17 RS2240002 Rev. 0

X2 Quantity Feature

This feature allows the user to change the

amount of time added when the X2 pad

and then the programmed pad is pressed.

Based on the original time, the X2 pad can

add from 10%-100% of additional cooking

time. The default is 80%. Example:

change cooking factor to 50% for third

cooking sequence.

1. Open oven door.

• If door is closed or

RESET

pad is

pressed before finishing

programming sequence, oven exits

programming mode.

2. Press and hold pad 1 for

approximately 5 seconds.

• After 5 seconds, signal sounds.

Display shows

“P:--”.

3. Press 3 pad to select the cooking

program.

4. Press 5 pad to change cooking factor.

• Display shows “CF:05”.

5. Press START pad to save changes.

6. Press STOP/RESET pad or close oven door to exit

programming mode.

Double Pad Programs

The oven control can be changed to store up to 100

cooking programs. See the “User’s Options” section of

this manual to change oven control.

To change the quantity for a double pad

program, follow the instructions above

except for a change to step #3. When

entering the cooking program number,

press 2 memory pads. For example, press

pads 0 and pad 3 to create a new cooking program. After

the program is saved, press pad 0 and pad 3 to start a

cooking program.

User Options

Follow the instructions below to customized the

microwave oven’s operation. End-of-cycle signal,

maximum cooking time and other options can be

changed to meeting your cooking needs.

Example: Change setting to single digit pad

operation.

1. Open oven door.

• If door is closed or

RESET

pad is pressed

before finishing programming sequence,

oven exits programming mode.

2. Press and hold pad 2 for approximately 5

seconds.

• After 5 seconds, signal sounds. Display

shows “0P:”.

3. Press 9 pad.

• See table for options.

• Displays shows “OP:91”.

• “OP” represents optional program mode, first

number represents option number and second

number represents functions currently selected for

option.

4. Press 9 pad repeatedly to change setting.

5. Press START pad to save changes.

• Repeat steps 3-5 to change additional options.

• Changes appear after door is closed or STOP/

RESET is pressed.

6. Press STOP/RESET pad or close oven door to exit

programming mode.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments

Amana Commercial Service Manual Page 52

Comments to this Manuals

Related products and manuals for Microwaves Amana Commercial