Amana Commercial Service Manual download pdf (Page 60)

A–25 RS2240002 Rev. 0

www.amanacommercial.com



1999 Amana Appliances

Amana, Iowa 52204

Quick Reference Instructions

Read “Important Safety Information” before using “Quick

Reference Instructions”. If there are unanswered

questions, see detailed sections of this manual.

Interrupting Operation

Open oven door or press STOP/RESET pad to interrupt

operation. Display continues to show countdown time.

Close door and press START pad to resume oven

operation.

Canceling Mistakes

If oven is not cooking, press STOP/RESET pad to clear

display. If oven is cooking, press STOP/RESET pad once

to stop oven, then again to clear display. If oven door is

open and time shows in display, close oven door and

press STOP/RESET pad to clear display.

Operating Preprogrammed Pads

1. Open oven door, place food in oven, and close oven

door.

2. Press numbered pad(s).

3. Oven stops cooking and oven signal sounds when

cooking timing elapses.

Manual Time Entry

1. Open oven door, place food in oven, and close door.

2. Press TIME ENTRY pad.

3. Press numbered pads to enter desired cooking time.

4. Press POWER LEVEL pad to change power level.

5. Press a numbered pad to enter desired power level.

6. Press START pad.

7. Oven stops cooking and oven signal sounds when

cooking timing elapses.

Programming Number Pads

1. Open oven door.

2. Press and hold pad

for approximately 5

seconds.

3. Press numbered

pad(s).

4. Press numbered pads to enter desired cooking time.

5. Press POWER LEVEL pad to change power level.

6. Press a numbered pad to enter desired power level.

7. Press START pad to save new cooking time and

power level in oven memory.

8. Press STOP/RESET pad or close oven door to exit

programming mode.

Part No. 12392743

Printed in U.S.A. 10/99

Programming Multiple Cooking Stages

1. Open oven door.

2. Press pad

for approximately 5 seconds.

• After 5 seconds, signal sounds. Display shows “P”.

4. Press numbered pad(s) to select memory pad

program.

• Display shows cooking time, “COOK LEVEL” and

power level if other than 100 percent power.

5. Press numbered pads enter desired cooking time.

6. Press POWER LEVEL pad to change power level.

• Display shows “COOK LEVEL” and current power

level if other than 100 percent power.

7. Press numbered pad to enter desired power level.

8. Press TIME ENTRY pad.

• Display briefly shows "P3

(1-4)

" indicating

programming, pad 3, stage 2. Then cook time and

power level for stage show in display.

• Repeat steps 5-8 to create additional stages.

9. Press START pad to save new cooking time and

power level in oven memory.

10. Press STOP/RESET pad or close oven door to exit

programming mode.

Changing X2 Quantity Feature

1. Open oven door.

2. Press and hold pad

for approximately

5 seconds.

3. Press numbered

pad(s) to select

cooking sequence.

4. Press numbered pad to change cooking factor.

5. Press START pad to save changes.

6. Press RESET pad or close oven door to exit

programming mode.

User Options

1. Open oven door.

2. Press and hold pad

for approximately

5 seconds.

3. Press a numbered pad.

4. Press numbered pad repeatedly to change setting.

5. Press START pad to save changes.

6. Press RESET pad or close oven door to exit

programming mode.

0P:--

MICRO DEFR WARM MEDHI POWER HOLD

COOK

LEVEL

TIMER

READY

CLOCK

CF:08

MICRO DEFR WARM MEDHI POWER HOLD

COOK

LEVEL

TIMER

READY

CLOCK

8P:08

MICRO DEFR WARM MEDHI POWER HOLD

COOK

LEVEL

TIMER

READY

CLOCK

1 2 ... 55 56 57 58 59 60

Comments to this Manuals

No comments

Amana Commercial Service Manual Page 60

Comments to this Manuals

Related products and manuals for Microwaves Amana Commercial