27
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to oven and discharge capacitor
before servicing, unless testing requires power.
H.V. board
Function Test Set-Up Meter
Setting
Probe Placement Results
Input to H.V. board At H.V. board Volts J1 pin 1 (Black wire)
& J1 pin 2 (Red wire)
Line voltage
Output to display
board
Disconnect
J5 connector
Volts J5 pin 1 &
J5 pin 47
7.4 VDC
Function Test Set-Up Meter
Setting
Probe Placement Results
Cooling fan Disconnect
J2 connector
Ohms J1 pin 1 (Black wire)
& J2 pin 4
Test mode 5 off – no continuity
Test mode 5 on – < 1
Convection motor Disconnect
J2 connector
Ohms J1 pin 1 (Black wire)
& J2 pin 3
Test mode 4 off – no continuity
Test mode 4 on – < 1
Microwave Disconnect
J4 connector
Ohms J4 pin 4 &
J4 pin 5
Test mode 3 off – no continuity
Test mode 3 on – < 1
Heater Disconnect
J4 connector
Ohms E6 & J4 pin 1 Test mode 1 off – no continuity
Test mode 1 on – < 1
Component Testing Procedures
Comments to this Manuals