Amana AAC051SRA Service Manual download pdf (Page 32)

PREPARE

WINDOW FOR

iNSTALLATiON

Inspect window track, sash, and sill

for its ability to support the weight of

air conditioner.

Measure width between window

moldings to ensure Instant Mount

window mounting kit will fit window

frame. Instant Mount models are

designed for windows from 24" to

34' wide.

Instant Mount kit supplied with unit

is designed for mounting in most

double-hung windows without

storm windows, For installation in

window frame with storm window,

modify sill by adding wood strips to

inner and outer sills. This raises

unit and eliminates interference of

storm window frame.

Storm window installation

If storm window frame does not allow

adequate clearance below sill (1/2"

required), remove storm window

frame or create clearance by adding

a wood strip (at least 1 1/2' wide)

along entire width of sill. Fasten

wood strip to sill with at least three

countersunk wood screws (not

supplied with kit). This provides a

smooth surface for mounting air

conditioner. 1/2"

Minimum

1 1/2"

Minimum - "_

Wood

N 0

D ' u

o° :_T

/ } 0

Storm Window f R

Frame

Mobile home window installation

Add wood strip (at least 1 1/2' wide)

along entire width of window sill.

Thickness of wood strip should match

height of front lip on window frame.

Fasten wood strip to sill with a

minimum of three countersunk wood

screws (not supplied with kit). This

provides a smooth surface for

mounting air conditioner.

Must be a minimum

i of 1/2" to clear

bottom rail on unit

! !/2" _ _ _ Window

Mm'mum - i _ - /Frame

Strp_/>5_

_ 'i 0DTu

" 0 0

R 0

,_ INSTALL UNIT IN

m WINDOW

Place unit in window. Lower sash

until it rests behind front flange of top

rail. Bottom rail must rest behind

window sill. With a level adjust unit

to a 1/2 bubble slope to the rear for

proper water drainage.

_Level

.... JWindow sash _

_ .................................................................................................................j

Curtain assembly cut

away for clarity.

INSTALL

BASi:PAN ANGLE

Back front attachment screw out

several turns and slip Basepan Angle

over screw head. Snug screw with

angle resting on window ledge.

Install two 25-mm screws through

angle into window ledge. Repeat for

opposite side.

25-mm

screws

Basepan

angle

Front attachment

screw

@2003 MaytagAppliancesCompany 16022061 Rev. 0 A -9

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 41 42

Comments to this Manuals

No comments

Amana AAC051SRA Service Manual Page 32

Comments to this Manuals

Related products and manuals for Split-system air conditioners Amana AAC051SRA